Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of Delaware

Commercial Pressure Washing for Concrete in Delaware

Pressure wash with a surface cleaner for concrete. Building washing and flatwork cleaning for offices, retail, restaurants, warehouses and other commercial properties, scheduled around your hours. Typical cost $400-$2,000.

Grime, mildew and stains build up a little at a time until one day the outside of your property looks years older. Commercial Pressure Washing for Concrete in Delaware brings it back, usually in a single visit. On concrete, the method we use is pressure wash with a surface cleaner.

The right method for the job

Pressure wash with a surface cleanerCleaning method
Usually 2,500-3,500 PSI with a rotary surface cleaner for even resultsPressure

Cleaning solution: A degreaser for oil spots and a pre-treatment for organic growth; post-treatment slows regrowth.

Caring for concrete

Plain broom-finish concrete is the surface pressure washing is made for. A rotary surface cleaner gives an even finish without the stripes a wand leaves, and hot water helps with grease and oil.

Avoid: Holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete.

How often: Every year, or every 6 months in shaded, damp spots.

Is it time for commercial pressure washing for concrete?

  • Dirty entrances and walkways
  • Stained building walls and signs
  • Gum, grease and spills around doors
  • Customer or tenant complaints
  • Health or property manager inspections coming up

Why it gets dirty

  • Heavy foot traffic
  • Vehicle traffic and drips
  • Food and grease near restaurants
  • Pollution and weather

Easy upkeep between cleanings

  • Sweep entrances daily
  • Clean up spills right away
  • Keep dumpster areas closed and clean

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Wash water reaching storm drains, which can violate local stormwater rules
  • Slips and liability during business hours
  • Damaging signs, windows and finishes

How we handle commercial pressure washing for concrete

  1. Survey the property and plan around your hours
  2. Set up signs and control wash water
  3. Pre-treat stains, gum and grease
  4. Clean walls and flatwork with the right pressure
  5. Final walkthrough and maintenance schedule

How much does commercial pressure washing for concrete cost?

$400-$2,000Typical range for a typical small to mid-size commercial building
Half a day to several daysTypical time on site
Quarterly to yearly, depending on trafficRecommended frequency

What moves the price:

  • Area and number of buildings
  • Scheduling: early-morning, overnight or weekend work
  • Whether wash water has to be recovered under local stormwater rules
  • Frequency: recurring service is usually priced lower per visit

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for concrete

Commercial Pressure Washing for Concrete in Delaware

Businesses in Delaware typically schedule exterior cleaning in spring and fall, with entrances and high-traffic walkways cleaned more often.

Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.

We cover 38 cities and towns across Delaware. Find commercial pressure washing for concrete in your city:

Commercial Pressure Washing for Concrete: frequently asked questions

How much does commercial pressure washing for concrete cost in Delaware?

Commercial Pressure Washing for Concrete typically costs $400-$2,000 for a typical small to mid-size commercial building, and usually takes Half a day to several days. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for commercial pressure washing for concrete?

For concrete: usually 2,500-3,500 PSI with a rotary surface cleaner for even results. What we avoid: holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete. We keep the pressure even and controlled, with the right tools for the surface.

Is commercial pressure washing for concrete safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule commercial pressure washing for concrete?

Every year, or every 6 months in shaded, damp spots. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Delaware

Pool Deck Cleaning for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $200-$500

HOA & Apartment Pressure Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $800-$5,000

Sidewalk & Walkway Cleaning for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $100-$250

Deck Restoration & Staining for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $800-$2,500

Patio Cleaning for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $150-$400

Oil Stain Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $100-$300

Pressure Washing for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $150-$600

Pressure Washing for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $150-$600

Sidewalk & Walkway Cleaning

Walkway, front path and sidewalk cleaning that removes slippery growth, gum and grime.

Typical $100-$250

Exterior Mold & Mildew Removal for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $250-$700

Garage Floor Cleaning

Garage floor degreasing and pressure washing to lift oil, tire marks and road salt residue.

Typical $100-$300

Roof Cleaning for Cedar Shake Roofs

Soft wash. Cedar shakes grow moss and lichen and turn gray as the wood weathers.

Typical $400-$1,000

Ready for a cleaner home or business?

Get a free pressure washing quote in Delaware. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote